Bomb Busters Card Tray with flip function
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tile holder for Bomb Busters wire tiles. With flip-function and firm grip.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 656
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a functional tile holder designed for the board game Bomb Busters, featuring an interactive flip mechanism operated by small push buttons that allow the tiles/cards to tip forward easily.
Printing notes:
The bottom part should be printed as a multi-part object (“Main” and “Letters”) with the text facing down on the build plate.
The top part includes built-in print supports and can be printed as provided.
After printing, remove the small plastic supports carefully using a hobby knife (e.g. Stanley knife) or flush cutters.Tested with 0.25 mm layer height and 3 perimeters.
Assembly:
After printing, the top and bottom parts need to be glued together.
I used a two-component (epoxy) adhesive, which worked very well.
This version was printed on a Prusa XL with two toolheads in two colors.
If you omit the “Letters” part, the model can also be printed on a single-extruder printer. If needed, rotate the model 45 degrees on the build plate to improve fit.
A version optimized for smaller print beds and single-toolhead printers will be released soon.