Bomb Busters Card Tray with flip function
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tile holder for Bomb Busters wire tiles. With flip-function and firm grip.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 65
- Makes
- 0
- Views
- 656
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a functional tile holder designed for the board game Bomb Busters, featuring an interactive flip mechanism operated by small push buttons that allow the tiles/cards to tip forward easily.
Printing notes:
The bottom part should be printed as a multi-part object (“Main” and “Letters”) with the text facing down on the build plate.
The top part includes built-in print supports and can be printed as provided.
After printing, remove the small plastic supports carefully using a hobby knife (e.g. Stanley knife) or flush cutters.Tested with 0.25 mm layer height and 3 perimeters.
Assembly:
After printing, the top and bottom parts need to be glued together.
I used a two-component (epoxy) adhesive, which worked very well.
This version was printed on a Prusa XL with two toolheads in two colors.
If you omit the “Letters” part, the model can also be printed on a single-extruder printer. If needed, rotate the model 45 degrees on the build plate to improve fit.
A version optimized for smaller print beds and single-toolhead printers will be released soon.