Unified Drawer Organizer – Printable Panel Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A seamless drawer organizer remix with printable panels that slot into the joints for a clean, unified look.
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 179
- Wydruki
- 2
- Wyświetlenia
- 785
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This remix transforms the original modular drawer organizer into a fully unified, seamless system. The original design used printed junction pieces combined with user‑cut panels (wood, acrylic, etc.). I redesigned the panels themselves so they print with integrated tabs that slide directly into the existing grooves, creating the appearance of a single, continuous piece.
All top edges are rounded for a softer, more finished look, and the printed panels eliminate the need for cutting or sourcing your own materials. In the example photos, I printed the full setup in a wood‑filled PLA that matches the drawer interior, giving it a clean, elegant, built‑in appearance.
This remix keeps the flexibility of the original system while making the build process simpler, faster, and more visually cohesive.
Material
PLA or PLA+ works great
Wood‑filled PLA gives a premium, furniture‑matched look
PETG optional if you expect heavy use
Layer Height
0.20 mm for general use
0.16 mm if you want extra‑smooth rounded edges
Walls & Strength
2–3 perimeters
10–15% infill is plenty (panels are mostly cosmetic)
Supports
No supports needed for the panels
For junction pieces, use standard support (not tree)
Orientation
Print upright with standard supports for best results
Fit Notes
Tabs are sized with a slight tolerance for typical PLA shrinkage
If your printer runs tight, scale the panel X/Y only by 100.5–101%
If your printer runs loose, scale down X/Y by 0.5%