Cowbell with Handle and Clapper printed with PPS-CF10
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D Cowbell printed with PPS-CF10 that sounds metallic. Has handle and clapper
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 213
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial
I was looking for a demonstration vehicle to try the 350C hotend on the new Elegoo Centauri Carbon 2. I wanted to try the new Polymaker PPS-CF10. Jsmaz3 made a fantastic handbell model ( Make of PPS-CF10 Bell by Simple3D | Download free STL model | Printables.com ), but it takes a lot of filament. I wanted to make something with less fillament and louder. I was curious about how annealing would change the metalic tone. Cowbells are simple construction and good noise makers.
I printed the cowbell and clapper with PPS-CF10 with 100% infill. The handle was printed with wood PLA
Listen to the sound before / after annealing:
I annealed the parts for 12 hours at approximately 125C in an old oven.
Things I used:
Polymaker PPS-CF10 ( https://amzn.to/4aqm2Gs )
Elegoo PLA wood ( https://amzn.to/4tr3AVY )
2mm Heat Inserts ( https://amzn.to/3ZI8U9x )
2mm bolts ( https://amzn.to/3ZNTksY )
Heat Insert tool ( https://amzn.to/46cHrAw )
Hex drivers ( https://amzn.to/45FTiHa )
cowbell ( https://amzn.to/49TkB3n )
FTC Disclaimer: We may earn commissions for purchases made through the links above. As Amazon Associates we earn from qualifying purchases