1 / 3
Shelf Mount Mic Boom For Blue Yeti Nano — zdjęcie 1
1 / 3

Shelf Mount Mic Boom For Blue Yeti Nano

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An articulated mic boom for mounting a Yeti Nano via its stock mounting bolts.

Ocena
0 / 5
Polubienia
0
Pobrania
9
Wydruki
0
Wyświetlenia
83
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Audio
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This microphone boom is intended to mount a Yeti Nano microphone to the underside of a shelf.  Mine hangs above my computer monitor.  It can stow out of the way or swing much closer. 

Example in the photos is printed in natural PLA, with the washers in the joints and the grommets that attach the mic to the yoke in TPU, to act as a friction material and pad.  Works surprisingly well.

Hardware Required:

3x M6 hex nuts

3x M6x30 or 35 hex head bolts

4x countersunk screws for mounting; I used #8 x 1/2" for attaching to plywood but you do you.

The two thumb turn bolts that come with the Yeti Nano as standard.

Tagi