Beehive Carry Handle – Simple 3D Printed Hive Lifting Grip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple and strong carry handle for beehive boxes (supers).
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 51
- Wydruki
- 1
- Wyświetlenia
- 193
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
Description
This is a simple and strong carry handle for beehive boxes (supers).
It is designed to make lifting and moving hive boxes easier and safer, especially when the box is full of honey.
The handle is screwed directly to the side of the hive box and provides a comfortable grip for two-hand lifting.
Two mounting variants are included:
2-screw version – faster installation
4-screw version – higher strength for heavy boxes
This model is intentionally simple, robust and easy to print without supports.
It is suitable for outdoor use when printed from PETG or ASA.
Features
Simple and strong design
Improves grip and ergonomics when lifting hive boxes
Two mounting variants: 2-screw and 4-screw
Easy to print (no supports needed)
Can be mounted with standard wood screws
Suitable for permanent outdoor installation
Lightweight and material efficient
Recommended use
Beehive box (super) carrying handle
Helps during hive inspections and honey harvest
Useful for Langstroth, Dadant and similar hive types
Printing recommendations
Material: PETG / ASA
Layer height: 0.2 mm
Infill: 30–40 %
Walls: 3–4 perimeters
Print orientation: flat on the bed
Supports: not required
Mounting
Fix the handle to the hive box using 2 or 4 wood screws (depending on your version).
Recommended screw diameter: 4–5 mm.
Screw directly into the wooden wall of the hive box.
Disclaimer
Use at your own risk.
Always check print strength before lifting heavy hive boxes.