1 / 2
CR10 v3 - Mount and Fan duct for TriangleLabs Matrix Extruder — zdjęcie 1
1 / 2

CR10 v3 - Mount and Fan duct for TriangleLabs Matrix Extruder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Ready to use and no need to add any peripherals, use the existing 5015part cooling and extruder fan of your CR10 v3.

Ocena
0 / 5
Polubienia
8
Pobrania
41
Wydruki
0
Wyświetlenia
1110
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

How I print?

Printer: Creality Ender 3 Pro (Klipper)

Material: PLA Transparent

Nozzle: 0.4mm

Layer Height: 0.2mm

Support: Fan Duct: no — Mount: yes

 

Screw I used:

7x - M3 x 8mm screw (2 screws for the Matrix mount at the back, 2 screws for the fanduct, and 3 screws to attach the mount on the extruder carriage.

3x - M3 nut to attach the mount on the extruder carriage.

1x - Cable tie just to hold the 5015 fan.

Tagi