1 / 6
DIY Kitchens (UK) cabinet leg for self-install kitchen units — zdjęcie 1
1 / 6

DIY Kitchens (UK) cabinet leg for self-install kitchen units

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A replacement leg for use on self install kitchen cabinets from diy-kitchens.com

Ocena
0 / 5
Polubienia
7
Pobrania
44
Wydruki
0
Wyświetlenia
237
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial

My son was refitting his kitchen with units purchased from diy-kitchens.com and - due to an error - found that he had to replace one cabinet that was already under the new work surface.  The length of the supplied legs and the combination of the work surface height and new flooring meant he was unable to fit the new cabinet in the space.

I reverse-engineered the leg so that I could create a new design with a reduced leg length in order to fit in the small space.

The model is parametric so that you can change the length of the mid section of the leg.  The STL file has a mid section length of 69mm & the original leg had a mid section length of around 90mm.  

If you want to change to a different length load the .f3d file into Fusion360, go to the 'Change Parameters' dialog, and change the 'expression' of the parameter 'ShaftMidLength' to the desired number of mm.

Can also be used to replace broken or damaged cabinet legs.

Prints without supports if you orient the model  standing upright with the screw-end at the bottom (the same orientation as it will be used in). 

I printed the model in PETG with cubic infill to improve its compression strength. 

Tagi