DIY Kitchens (UK) cabinet leg for self-install kitchen units
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A replacement leg for use on self install kitchen cabinets from diy-kitchens.com
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 44
- Makes
- 0
- Views
- 241
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
My son was refitting his kitchen with units purchased from diy-kitchens.com and - due to an error - found that he had to replace one cabinet that was already under the new work surface. The length of the supplied legs and the combination of the work surface height and new flooring meant he was unable to fit the new cabinet in the space.
I reverse-engineered the leg so that I could create a new design with a reduced leg length in order to fit in the small space.
The model is parametric so that you can change the length of the mid section of the leg. The STL file has a mid section length of 69mm & the original leg had a mid section length of around 90mm.
If you want to change to a different length load the .f3d file into Fusion360, go to the 'Change Parameters' dialog, and change the 'expression' of the parameter 'ShaftMidLength' to the desired number of mm.
Can also be used to replace broken or damaged cabinet legs.
Prints without supports if you orient the model standing upright with the screw-end at the bottom (the same orientation as it will be used in).
I printed the model in PETG with cubic infill to improve its compression strength.