1 / 1
Splined shaft water faucet handle 20 teeth
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A handle for the splined shaft water faucet handle with a 7.6mm shaft diameter (splined section) and have 20 teeth.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 137
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
Print using a 0.2mm nozzle, 0.4mm nozzle will not fit because of the detail of the teeth.
Print with at least 3 walls because the teeth section need to be strong.
I made the top to be secured with an M4 hex nut. This is to replace the cheap flat head that is impossible to remove once oxidation sets in.
I print with PETG with a 5% scale to compensate for material shrinkage so let's start with that and change the scale to fit your case.
Here is the video about the results:
