1 / 1
Splined shaft water faucet handle 20 teeth — image 1

Splined shaft water faucet handle 20 teeth

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A handle for the splined shaft water faucet handle with a 7.6mm shaft diameter (splined section) and have 20 teeth.

Rating
0 / 5
Likes
4
Downloads
56
Makes
0
Views
137
Reviews
0

Updated at source:

Model information

Category
Bathroom
License
Creative Commons — Attribution — Noncommercial

Print using a 0.2mm nozzle, 0.4mm nozzle will not fit because of the detail of the teeth.

Print with at least 3 walls because the teeth section need to be strong.

I made the top to be secured with an M4 hex nut. This is to replace the cheap flat head that is impossible to remove once oxidation sets in.

I print with PETG with a 5% scale to compensate for material shrinkage so let's start with that and change the scale to fit your case.

Here is the video about the results: 

Tags