Mebus ATN0120 thermo-hygrometer holder on 10x2mm magnets or double-sided tape
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two versions of a Mebus thermo-hygrometer holder ATN0120 to be placed inside an enclosure or a filament storage.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 25
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This Mebus Thermo-Hygrometer Model ATN0120, like "Krontaler" as well, is capable of measuring humidity starting at 20% (in contrast to other relatively cheap hygrometers, that start measuring humidity at 30%).
The identical proportions regarding width and height of this hygrometer allow the holders to be used in both orientations - vertical and horizontal.
The downside of the double sided tape fixated holder comes into play when the hygrometer battery needs to be replaced.
WARNING: neodymium magnets are extremely dangerous to small children and can cause life threatening harm and death if swallowed. That is why i have added a frame to secure the front-side magnets, but in case little kids were around i would also glue the magnets into it for a better safety.
A NOTE ON MAGNET SIZE: Magnets that i have are actually smaller than 10mm in diameter (around 9,85mm). In case if your magnets are exactly 10mm or bigger enlarging the magnet pockets can be necessary.
gexo(-graphix) 2026
Made with FreeCAD and visualized with fstl on a GNU/Linux system.
Thanks a lot to all volunteers who help creating Free Open Source Software for making my work possible.