1 / 3
Cat fountain submersible pump adapter (Triexie Trinkbrunnen Tauchpumpe)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The old Trixie pump was broken/ loud. The same model was not available. So I printed an adapter to connect the new one.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 70
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial
My Trixie submersible pump was broken. It was very loud, so I had to buy a new one.
I'm not sure how to add the options here: I printed it in PETG.
The same model was not available anymore. Because of that, I had to 3D print the adapter myself.
I printed the riser tube that connects the pump to the fountain outlet.
Measures:
Bottom (thick side):
Inner diameter: 8.10 mm
Outer diameter: 10.10 mm
Top (thin side):
Inner diameter: 6.20 mm
Outer diameter: 8.20 mm