Modular airgun moderator/silencer for m10x1 thread.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Airgun moderator for 5.5mm (0.22 cal) and 4.5mm (0.177 cal). Fits Diana Stormrider, Bandit, Chaser, and other M10x1 guns
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 525
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution
Fully 3D printed airgun moderator/silencer designed for a Diana Chaser, but fits other M10x1 threaded air guns.
The end cap can be easily removed by finger friction, in case it gets too tight the included wrench makes it easy to remove.
The integrated baffles do most of the work of reducing the sharp noise of a shot, adding a porous material to slow down the rushing gas improves the efficiency. I have tested all kinds of materials, but at this point find it easier to print the "sponge" part with 0 walls and gyroid infill at different densities to see what works best.
The one in the picture has over 500 shots of 5.5mm hollow point pellets with no issues. Depending on the caliber, projectile weight, and gas pressure anywhere from 2 to 5 segments do the job. Print as many body segments as you need.
Please excuse picture quality.