FitcamX Rear Camera Mount with added features
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Thank you @jrichards222 for the original model. I added a recess for the camera so it would prevent rotating from cable
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 196
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
Thank you @jrichards222 for the original model.
I added a recess for the camera so it would prevent rotating from cable strain, as well as added a cable route through the clip hole.
I recommend adding hook sided tape to the bottom side of the mount to help hold it in place.
Hook side tape example: https://a.co/d/1vewp1Z
Installation:
Remove push pin.
Affix mount to roof liner lining up the holes. Cable channel should point to the front of the vehicle.
Push cable through the hole leaving about 5 inches of slack for the camera.
Insert plastic push pin into hole.
Stick camera to mount.