FitcamX Rear Camera Mount with added features
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Thank you @jrichards222 for the original model. I added a recess for the camera so it would prevent rotating from cable
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 32
- Makes
- 0
- Views
- 196
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Share Alike
Thank you @jrichards222 for the original model.
I added a recess for the camera so it would prevent rotating from cable strain, as well as added a cable route through the clip hole.
I recommend adding hook sided tape to the bottom side of the mount to help hold it in place.
Hook side tape example: https://a.co/d/1vewp1Z
Installation:
Remove push pin.
Affix mount to roof liner lining up the holes. Cable channel should point to the front of the vehicle.
Push cable through the hole leaving about 5 inches of slack for the camera.
Insert plastic push pin into hole.
Stick camera to mount.