Lamp Switch Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A convenient hold to keep your lamp switch easy to access
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 93
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Standard Digital File License
Lamp Switch Holder
These types of switches commonally have a curved/ached base (at least here in the UK) which means there isn't enough surface area on the back to allow double sided tape to be affective (this is the main reason I designed this in the first place as I got fedup of double sided tape not working). It has the added bonus of allowing the user to not have to re-apply tape or unscrew anything everytime they want to detache the switch (and move the lamp easily) with modification to the switch it's self.
Designed to be attached to any flat surface with either double-sided tape or using 2 x M3 counter sunk screws.
Suitable for most inline switches commonly found on lamps (IKEA, Home Bargins, B&M, etc) that are no bigger than 61x26.5x17.5mm. Full dimensions can be found in the photos.
Once mounted, simply push the switch into the holder. To remove, start by pulling one end of the switch out first and it will simply slide out.
I have tested this with PLA and TPU and found best results with TPU. If you are likely to want to take the switch out regularly, I recommend TPU as PLA works but if you are not carful inserting or removing the switch, I have found it can crack easy.
The model in the photos was printed on a Bambu A1 with Bambu Lab TPU for AMS in black.
I am a hobbyist designer and creator with a passion for designing and I love to know how I can improve my designs so any comments or advice on how my design or guide could be improved are always welcome! Thank you for reading my tutorial and have fun making!