Desk Edge Mount for Dell WD15 USB-C Dock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Desk edge mount for the Dell WD15 USB-C dock that allows the dock to slide out slightly for easier cable access
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 145
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
This model is a desk edge mount for the Dell WD15 USB-C docking station.
The dock slides into the holder and can be partially pulled out (~20 mm) to improve access to cables, while still remaining supported by the mount. It is intended to be installed on the edge of a desk or table to keep the docking station off the desk surface.
The design is open to allow sufficient airflow and access to all connectors.
Features
Designed for Dell WD15 USB-C dock
Mounts to the desk edge
Allows the dock to slide out approximately 2 cm
Keeps the dock supported and accessible
Open design for airflow
Mounting
Designed for 4 wood screws
Printing
Enable supports for the screw overhangs to ensure proper bridging
PLA or PETG recommended
Layer height: 0.2 mm
Infill: 20–30%
Print flat on the build plate
Compatibility
Dell WD15 USB-C Dock only