1 / 4
120mm fan enclosure for sucking and blowing air
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Housing for a 120mm fan for sucking of blowing air. This version does not contain a filter.
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 96
- Wydruki
- 0
- Wyświetlenia
- 479
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (29)Powiązane
Housing for a 120mm fan for sucking or blowing air. This version does not have a filter (to increase its air flow)
Just use four M4 countersunk screws. You can additonally drill (or "solder") a hole for a switch. Have fun!