Rupee (optimized with custom supports)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Rupee by Ashmonster is a nice looking Rupee, but I had trouble printing it: Printing it flat would result in…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 47
- Wydruki
- 1
- Wyświetlenia
- 303
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution
The Rupee by Ashmonster is a nice looking Rupee, but I had trouble printing it: Printing it flat would result in curled edges, printing it standing on a side with a brim (yes, I tried that) didn't work either: It would tip over at around the halfway mark.
So I created this remix:
It's the standard Rupee .stl but with a secondary file with custom supports. These can be used to print the Rupee standing up and holding on the side.
The custom supports need to be printed "as supports" in Cura and the Support X/Y Distance needs to be lowered to 0.2mm.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
200
Infill:
20
Filament: purefil PLA
Category: Coins & Badges