Rupee (optimized with custom supports)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The Rupee by Ashmonster is a nice looking Rupee, but I had trouble printing it: Printing it flat would result in…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 47
- Makes
- 1
- Views
- 303
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution
The Rupee by Ashmonster is a nice looking Rupee, but I had trouble printing it: Printing it flat would result in curled edges, printing it standing on a side with a brim (yes, I tried that) didn't work either: It would tip over at around the halfway mark.
So I created this remix:
It's the standard Rupee .stl but with a secondary file with custom supports. These can be used to print the Rupee standing up and holding on the side.
The custom supports need to be printed "as supports" in Cura and the Support X/Y Distance needs to be lowered to 0.2mm.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
200
Infill:
20
Filament: purefil PLA
Category: Coins & Badges