1 / 4
BETA Strain Relief for LDO Nitehawk NHK-36 Cable & Vitalii CNC EBB36 Mount — zdjęcie 1
1 / 4

BETA Strain Relief for LDO Nitehawk NHK-36 Cable & Vitalii CNC EBB36 Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I wanted to be able to better fix my umbilical to my toolhead, so I made this to create a tight connection.

Ocena
0 / 5
Polubienia
6
Pobrania
21
Wydruki
0
Wyświetlenia
311
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Standard Digital File License

THIS MODEL IS A WORK IN PROGRESS

This is designed to better mount an LDO Nitehawk NHK-36 cable (Described in the docs as "fully overmolded") to a Vitalii CNC EBB36 mount rigidly, including the spring steel umbilical guide. Personally I use the N3MI TPU Umbilical.

Print both halves, on the front piece insert two 4mm heatset inserts. On the back you'll need two flat nuts to put in through the slots.

Use two 12mm SHCS to secure the connector around the wire, bend the last 3mm of the springsteel 90 degrees so it fits into the slot in the back of the connector, then slide the cable onto the board and use 6mm BCHS to connect everything to the top two holes of the Vitalii plate.

Tagi