P
PrintablesVitalii3D
Vitalii3D XOL/A4T Mount Printable Parts
Please print from ABS or any other high temp material using official recommended Voron settings. A4T/XOL Mount
- Pobrania
- 229
- Polubienia
- 19
- Ocena
- 0
Wyniki wyszukiwania: vitalii3d
Liczymy pasujące modele…
P
PrintablesAldehyde Designs
Extended X- Endstop for Vitalii3D Super LightWeight Carriage
Hello, I noticed while using my Chaotic Labs carbon fiber tubes, the x-end stop piece for Vitalii3D Super LightWeight Carriage came up short. I made a part that will now ensure that the end stop will hit the end of the carriage. Also…
- Pobrania
- 111
- Polubienia
- 14
- Ocena
- 5
P
PrintablesAdam Swint
Improved Beacon/Cartographer mount for Vitalii3D CNC Dragonburner carriage
Update 11/2025: Updated the brace so it does not interfere with the Cartographer connector. Also made a few more cable management cutouts for more routing options. I was having a hard time getting consistent results from my Carto/Beacon…
- Pobrania
- 82
- Polubienia
- 13
- Ocena
- 0
P
PrintablesRoed
Beacon/Carto spacers for Vitalii3D XOL/A4T mount
When you use the Vitalii3D XOL/A4T Mount for Voron Printers it's possible that your Beacon/Carto is hitting the hotend. In my case it was the Trianglelab Dragon Ace Volcano where Beacon hits the sock/heater block. The hotend is also in…
- Pobrania
- 58
- Polubienia
- 7
- Ocena
- 5
P
PrintablesSimon
Improved Beacon/Cartographer mount for Vitalii3D CNC Dragonburner carriage no endstop
I am using sensorless xy homing, so I wanted this improved/modified version without the endstop switch part.
- Pobrania
- 39
- Polubienia
- 8
- Ocena
- 0
P
PrintablesMario
Vitalii3D CNC X Carriage Beacon adapter for Dragon UHF
I bought this cnc x carriage https://www.etsy.com/listing/1639526932/super-lightweight-carriage-for-voron because the dragon uhf made my plastic x carriage heat sets fall out due to the plastic mount softening up from the heat. I also…
- Pobrania
- 31
- Polubienia
- 7
- Ocena
- 5
P
PrintablesPaul Gritt
Cable support for Vitalii3D CNC EBB36 Mount
Cable support for the Vitalii3D CNC EBB36 Mount, specifically for the EBB36 Gen 2 and Orbiter 2.5 configuration. I have designed it to be a very tight fit around the CNC Mount. Make sure the mount is pushed all the way into the plastic…
- Pobrania
- 15
- Polubienia
- 3
- Ocena
- 5
P
Printablesakashrpatel
Vitalii3D CNC Front Idler Cover / Jabberwocky Cutter Helper
A cover for the Vitalii3D CNC Front Idlers that helps your Jabberwocky cutting arm compress fully to cut filament.
- Pobrania
- 10
- Polubienia
- 3
- Ocena
- 0
P
Printables4GAuto
Vitalii3D Lightweight X Carriage Klicky Adapter for Slice Mosquito
Printed mine in PCCF but I am sure ABS/ASA would be fine. After the first one melted from being too close to the hotend I just didn't want to risk it.
- Pobrania
- 9
- Polubienia
- 1
- Ocena
- 0
P
PrintablesBeep Boop
Vitalii3D PCB Klicky Adapter
Modified version of the PCB Adapter for the VoronLightweightXCarriage
- Pobrania
- 7
- Polubienia
- 1
- Ocena
- 0
P
PrintablesBeep Boop
Vitalii3D CNC EBB36 Mount - Canbus Terminal Plug Firmer Holder Thing
This toolhead's MCU is a Fysetc H36 which uses the same mounting pattern as the EBB36 but has a preterminated cable that has no locking mechanism. I had problems with the cable coming loose and devised a quick, adjustable, easy to print…
- Pobrania
- 4
- Polubienia
- 2
- Ocena
- 0
P
Printables
PUG Mount - Vitalii3D Double Shear Trident AB Mounts
I created this updated PUG mount for the newer double shear variant of Vitalii3D's Trident AB mounts. I used the original design idea here and integrated a few variants of the popular PUG design. It should slide right into place with some…
P
Printables
Beacon/Carto spacers for Vitalii3D XOL/A4T mount
When you use the Vitalii3D XOL/A4T Mount for Voron Printers it's possible that your Beacon/Carto is hitting the hotend. In my case it was the Trianglelab Dragon Ace Volcano where Beacon hits the sock/heater block. The hotend is also in…
P
Printables
Vitalii3D CNC EBB36 Mount - Canbus Terminal Plug Firmer Holder Thing
This toolhead's MCU is a Fysetc H36 which uses the same mounting pattern as the EBB36 but has a preterminated cable that has no locking mechanism. I had problems with the cable coming loose and devised a quick, adjustable, easy to print…
P
Printables
Improved Beacon/Cartographer mount for Vitalii3D CNC Dragonburner carriage no endstop
I am using sensorless xy homing, so I wanted this improved/modified version without the endstop switch part.
P
Printables
Vitalii3d CNC A Drive PUG mount
Uses 2 m5s, 3 m3s (one optional), and two m3 heated inserts. I've run this for 200 hours without issue. I use the secondary cable hole for a camera and the primary/PUG for my umbilical Model references the actual cnc design files from…
P
Printables
Extended X- Endstop for Vitalii3D Super LightWeight Carriage
Hello, I noticed while using my Chaotic Labs carbon fiber tubes, the x-end stop piece for Vitalii3D Super LightWeight Carriage came up short. I made a part that will now ensure that the end stop will hit the end of the carriage. Also…
P
Printables
PZ Probe Mount for Stealthburner with Vitalii3D CNC Carriage
PZ Probe Mount I printed with typical Voron print settings in ABS. I did use supports on the face adjacent to the stepper motor - that side is not visible. Mount to carriage with M3x6 BHCS, and mount board using screws supplied with the…
P
Printables
PUG Mount - Vitalii3D Double Shear Trident AB Mounts
I created this updated PUG mount for the newer double shear variant of Vitalii3D's Trident AB mounts. I used the original design idea here and integrated a few variants of the popular PUG design. It should slide right into place with some…
P
Printables
Vitalii3d CNC A Drive PUG mount
Uses 2 m5s, 3 m3s (one optional), and two m3 heated inserts. I've run this for 200 hours without issue. I use the secondary cable hole for a camera and the primary/PUG for my umbilical Model references the actual cnc design files from…
P
Printables
Vitalii3D Dragonburner CNC carrier
I have a trident, the Vitalii3D recommended mount makes the carto too far back and can hit the middle rear leadscrew. None of the other models I could find worked. So I created my own. y_offset: 22.5 I have two versions, one with just…
P
Printables
vitalii3d endstop fix
I like the vitalii3d XY joint, but the adapter for the end stop is out of date. I updated it to have a notch for the lip on the right joint as well as moving the holes to fit the hall effect endstop. I hope this helps others.
P
Printables
CNC X-Carriage Add-On Parts for VORON Stealthburner (Vitalii3D)
The VoronLightweightXCarriage by Vitalii3D 🥰 is a fantastic lightweight carriage for the Stealthburner but I was not happy with the existing cable management solution for a ClockWork 2 setup. So, time to make some parts. The Features A…