1 / 2
Vitalii3D CNC EBB36 Mount - Canbus Terminal Plug Firmer Holder Thing — zdjęcie 1
1 / 2

Vitalii3D CNC EBB36 Mount - Canbus Terminal Plug Firmer Holder Thing

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

When things really heated up the terminal plug on my canbus mcu would wiggle loose a bit. This solved that problem.

Ocena
0 / 5
Polubienia
2
Pobrania
4
Wydruki
0
Wyświetlenia
70
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

This toolhead's MCU is a Fysetc H36 which uses the same mounting pattern as the EBB36 but has a preterminated cable that has no locking mechanism. I had problems with the cable coming loose and devised a quick, adjustable, easy to print solution. 

BOM:

  • Qty: 4  |  M3x4mmLx5mmW Heat Set Inserts (Voron Spec)

  • Qty: 2  |  M3x6mm BHCS or SHCS

  • Qty: 2  |  M3x16mm - 18mm BHCS or SHCS (Longer is okay)

Install instructions, see photo for example:

  1. Install qty:4 M3 Heat Set Inserts on the printed part (M3x4mmLx5mmW)

  2. Install printed part onto the top mounting hole on Vitalii3D's CNC EBB36 Mount with qty:2 M3x6mm BHCS.

  3. Use qty:2 M3x16mm - 18mm to apply downward pressure on the terminal plug. Don't crank it down! It only takes around 1/2 to 3/4 of a turn past first contact with the plug to apply that gentle pressure 💆

Tagi