PUG Mount - Vitalii3D Double Shear Trident AB Mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Umbilical mount using PUG that goes on the A drive mount from Vitalii Double Shear Trident AB Mounts.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 182
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
I created this updated PUG mount for the newer double shear variant of Vitalii3D's Trident AB mounts. I used the original design idea here and integrated a few variants of the popular PUG design.
It should slide right into place with some friction and can be secured to the A motor mount using an M3x8 BHCS. The two halves are secured with an M3x8 BHCS from the left component and a heatset insert on the right component.
This was originally designed for me to use with an LDO Nitehawk 36 umbilical so the 6.5mm ID seems to work well for that purpose. I'm not sure yet whether the medium or small size is ideal in a Trident so I've uploaded both sizes as well as the screw/zip tie variants.
Fusion 360 and STEP file is uploaded. You can insert any other versions of the PUG, align to the main bottom parts of the mount then combine.
Side note: If you are looking for one with the actual clamp/grooves for PUG, take a look at this mount.
02/17/26 - STEP version uploaded.