1 / 10

Wifi Squeezebox & Bluetooth Speaker Amp

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

TheKwijibo

@TheKwijibo_238530

This is a Wifi Squeezebox Amplifier & Bluetooth Receiver setup. I have built in speakers in my bedroom, but no…

Ocena: 0 / 5
Polubienia: 3
Pobrania: 9
Wydruki: 0
Wyświetlenia: 363
Oceny: 0

Aktualizacja u źródła: 12 kwi 2022

Informacje o modelu

Źródło: Printables
Kategoria: Audio
Licencja: Creative Commons — Attribution

Szczegóły Pliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (4)

This is a Wifi Squeezebox Amplifier & Bluetooth Receiver setup. I have built in speakers in my bedroom, but no amplifier or receiver. This was designed to allow one to use their smartphone to play via Bluetooth, or through a Squeeze service like Logitec Media Server. I didn't bother to include a 3.5mm jack opening, as this was to be a wireless only setup.

There are buttons that can utilize the Bluetooth module in front, and the main switch flips between Wifi and Bluetooth sources. In order to use the Raspberry Pi and DAC, one must feel comfortable setting up PiCorePlayer on a Rasperry Pi Zero or similar.

I printed using Wood PLA, sanded, stained, and sealed with wax.

The entire unit can be printed on a 200x200 bed