8 page single-sheet zine cutting guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cutting guide for improving zine-making workflow
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 20
- Wydruki
- 1
- Wyświetlenia
- 152
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This guide, when screwed down to a cutting board or other solid surface, acts as a guide for rapidly cutting multiple 8 page zines. Guide here for folding this type of zine (no affiliation with that link).
This guide fits 5 zines easily, 8+ with a little wiggling.
Screw holes are sized for #8 pan head screws. Recommend extra perimeters or solid infill around the screw holes to provide a solid backing for the screws.
The slot length is longer than the cut to account for the radius of a 45mm rotary cutter. Note that your rotary cutter must allow for over 6mm of exposed blade to be compatible with the slot depth of this guide.
A "fold line" mark is provided for alignment of a utility knife, x-acto, or similar blade tool.
STRONGLY recommend mounting this to a sturdy surface with plenty of board past the cutting guide to prevent blade accidents. Keep your fingers away from the sharp things zone!
STL, STEP, and 3MF provided - same model in all 3.