8 page single-sheet zine cutting guide
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cutting guide for improving zine-making workflow
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 20
- Makes
- 1
- Views
- 155
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
This guide, when screwed down to a cutting board or other solid surface, acts as a guide for rapidly cutting multiple 8 page zines. Guide here for folding this type of zine (no affiliation with that link).
This guide fits 5 zines easily, 8+ with a little wiggling.
Screw holes are sized for #8 pan head screws. Recommend extra perimeters or solid infill around the screw holes to provide a solid backing for the screws.
The slot length is longer than the cut to account for the radius of a 45mm rotary cutter. Note that your rotary cutter must allow for over 6mm of exposed blade to be compatible with the slot depth of this guide.
A "fold line" mark is provided for alignment of a utility knife, x-acto, or similar blade tool.
STRONGLY recommend mounting this to a sturdy surface with plenty of board past the cutting guide to prevent blade accidents. Keep your fingers away from the sharp things zone!
STL, STEP, and 3MF provided - same model in all 3.