1 / 9
Duplo Ball Joint Block Mounted Hot Wheels Track Connector (push button pin lock connector) — zdjęcie 1
1 / 9

Duplo Ball Joint Block Mounted Hot Wheels Track Connector (push button pin lock connector)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix of @Plavatos' Duplo ball joint Hotwheels adapter using standard push button pin connector

Ocena
0 / 5
Polubienia
16
Pobrania
87
Wydruki
0
Wyświetlenia
393
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Summary

Remix of @Plavatos' Duplo Hot Wheels track connector ball joint remix of @Timbo's Duplo Hinge Adapter and @Worti's ball socket Duplo block to use thicker, full size push/pin connectors that lock.  Works with many printables Hot Wheels tracks that may have looser connector tolerances like the FlexiTrack shown by @TomasDivisek_3201152. 

Big thanks to the original modelers

Layer Heights and Materials

  • Recommend using PETG for better connector flexibility

  • PLA tested and confirmed working though support material is harder to remove and connectors are noticeably less flexible.

  • 0.2mm layer height is acceptable detail for pins and push button on connector. 

  • Thicker layers may work as well, but could cause breakage and delamination with chamfered edges due to lack of layers and flexibility, especially with PLA prints. 

Supports & Plating

  • Recommend "snug" style autogenerated supports "on build plate only" as shown in example pictures.  (PrusaSlicer or equivalent)

  • Default support setting should make supports fully removable with needle nose pliers. 

  • Twisting and/or  a rigid "L" pick or similar tool is helpful to release supports from inside Duplo block

  • "Ball joint" down orientation on connector ensures a smooth top layer with good detail which aids in releasing connectors, especially from printed tracks.

  • A flat scraper / utility knife is useful for support removal on connector side.

  • Cut inner ball socket supports in half vertically for easier removal or use support blockers to prevent if unsupported print is adequate. 

Tagi