Duplo Ball Joint Block Mounted Hot Wheels Track Connector (push button pin lock connector)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of @Plavatos' Duplo ball joint Hotwheels adapter using standard push button pin connector
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 89
- Makes
- 0
- Views
- 402
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Summary
Remix of @Plavatos' Duplo Hot Wheels track connector ball joint remix of @Timbo's Duplo Hinge Adapter and @Worti's ball socket Duplo block to use thicker, full size push/pin connectors that lock. Works with many printables Hot Wheels tracks that may have looser connector tolerances like the FlexiTrack shown by @TomasDivisek_3201152.
Big thanks to the original modelers
Layer Heights and Materials
Recommend using PETG for better connector flexibility
PLA tested and confirmed working though support material is harder to remove and connectors are noticeably less flexible.
0.2mm layer height is acceptable detail for pins and push button on connector.
Thicker layers may work as well, but could cause breakage and delamination with chamfered edges due to lack of layers and flexibility, especially with PLA prints.
Supports & Plating
Recommend "snug" style autogenerated supports "on build plate only" as shown in example pictures. (PrusaSlicer or equivalent)
Default support setting should make supports fully removable with needle nose pliers.
Twisting and/or a rigid "L" pick or similar tool is helpful to release supports from inside Duplo block
"Ball joint" down orientation on connector ensures a smooth top layer with good detail which aids in releasing connectors, especially from printed tracks.
A flat scraper / utility knife is useful for support removal on connector side.
Cut inner ball socket supports in half vertically for easier removal or use support blockers to prevent if unsupported print is adequate.
