1 / 2
Hueforge StampThe Great Lighthouse of Alexandria — zdjęcie 1
1 / 2

Hueforge StampThe Great Lighthouse of Alexandria

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A stamp-like hueforege.

Ocena
0 / 5
Polubienia
9
Pobrania
5
Wydruki
0
Wyświetlenia
40
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Hello,

this is the fourth part of the seven wonders, i used Ferdinand Knab's paintings as source model. You can resize the image in your slicer to 200*160 mm before slicing (i did it so, to make all print at the same size); and you can use any other black filament type, about the others i am not sure, but feel free to experiment. There is two .stl file, one with the stamp-like effect, and one without.

Printing:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200.07x160.2mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm

The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

#000000 PLA Alzament Black Transmission Distance: 0.2

#0a5780 PLA BambuLab Basic Cyian Transmission Distance: 3.5

#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3

#ffffff PLA Alzament White Transmission Distance: 5

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer #11 (0.96mm) swap to Basic Cyian

At layer #14 (1.2mm) swap to Blue Gray

At layer #19 (1.6mm) swap to White for the rest.

Hope you like it, leave a comment, and have a nice day!

Tagi