1 / 2
Hueforge Stamp Statue of Zeus at Olympia — zdjęcie 1
1 / 2

Hueforge Stamp Statue of Zeus at Olympia

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A stamp-like hueforge.

Ocena
0 / 5
Polubienia
9
Pobrania
3
Wydruki
0
Wyświetlenia
60
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Hello,

this is the sixth part of the seven wonders, i used Ferdinand Knab's paintings as source model. You can resize the image in your slicer to 160*200 mm before slicing (i did it so, to make all print at the same size). There is two .stl file, one with the stamp-like effect, and one without.

Printing:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 160.55x200.07mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm

The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.23997mm

#1b3b01 PLA BambuLab Matte Dark Green Transmission Distance: 1

#ff9016 PLA BambuLab Basic Pumpkin Orange Transmission Distance: 5.5

#fec600 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.4

#ffffff PLA Alzament White Transmission Distance: 5

This print uses 4 unique filaments

Swap Instructions:

Start with Matte Dark Green

At layer #13 (1.12mm) swap to Pumpkin Orange

At layer #16 (1.36mm) swap to Sunflower Yellow

At layer #19 (1.6mm) swap to White for the rest.

Hope you like it, leave a comment, and have a nice day!


Tagi