Stamp HueforgeTemple of Artemis at Ephesus
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A stamp-like hueforge.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 38
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
Hello,
this is the seventh part of the seven wonders, i used Ferdinand Knab's paintings as source model. You can resize the image in your slicer to 200*160 mm before slicing (i did it so, to make all print at the same size). There is two .stl file, one with the stamp-like effect, and one without.
Printing:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200.07x148.91mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
#000000 PLA Alzament Black Transmission Distance: 0.2
#1b3b01 PLA BambuLab Matte Dark Green Transmission Distance: 1
#ff9016 PLA BambuLab Basic Pumpkin Orange Transmission Distance: 5.5
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Matte Dark Green
At layer #14 (1.2mm) swap to Pumpkin Orange
At layer #19 (1.6mm) swap to Jade White for the rest.
Hope you like it, leave a comment, and have a nice day!
