Cyberpunk Book Nook - VoxMechina
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inspired by my latest robot designs, I created a book nook repair shop for a droid trying to survive these metal horrors
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 670
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
This book nook was inspired by my other robotic builds to tie them together in a nice shelf piece. Shown is a robot performing repairs on almost every limb in their small hideaway where they keep and display their trophies. This model is compatible with an LED filament that can be wrapped around the IVar reactor eggs for a ambient glow.
I also included versions of the nook with no wires which can be printed and added after the fact. I printed the model whole and was a bit tricky to remove inner supports, slicing in half might yield better results.
Print settings
0.4mm nozzle
0.2mm layer height
2 walls
15% infill
Supports enabled, not just on build plate, allow supports on small overhangs as well (these are the settings I had the best results with)