1 / 2
PTFE Holder with Passive Tube Lock (Prusa MK3S+) — zdjęcie 1
1 / 2

PTFE Holder with Passive Tube Lock (Prusa MK3S+)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

PTFE tube holder with passive anti-pullback function preventing backward movement during retractions when not horizontal

Ocena
0 / 5
Polubienia
2
Pobrania
14
Wydruki
0
Wyświetlenia
155
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v2.0

Description

This part is a PTFE tube holder designed for Prusa MK3 / MK3S / MK3S+ printers.
Its primary function is to hold and guide the PTFE tube, but it also provides a passive anti-pullback effect during retractions.

Unlike active clamps or rollers, this design works purely through geometry and controlled friction.


How it works

As long as the PTFE tube is not perfectly horizontal, the holder uses:

  • the tube angle

  • and controlled surface friction

to reduce backward movement of the PTFE tube during retractions.

Instead of being pulled back (for example into a filament dryer), the tube tends to move upward and flex naturally together with the toolhead.

The PTFE tube is not rigidly clamped.
It can still:

  • flex freely

  • follow X and Z axis motion

  • return to its neutral position automatically

This prevents excessive stress on the extruder or hotend while still limiting backward tube movement.


When this part is useful

This holder is especially helpful if:

  • you are using fast or frequent retractions

  • you are running Klipper

  • your filament comes from a dryer or external holder

  • you have experienced PTFE tube pullback during retractions


Important note

This design relies on tube angle to work correctly.
If the PTFE tube is installed perfectly horizontal, the passive anti-pullback effect will be reduced.

This is intentional and part of the design concept.


Files included

  • Left version

  • Right version

  • Combined file (left + right)

Print only the version you need.


Printing recommendations

  • Material: PLA or PETG (PETG recommended for durability)

  • No supports required

  • Print orientation: as provided in the STL

  • Standard 0.4 mm nozzle works well


Compatibility

  • Prusa MK3/S/+

  • Prusa MK3.5/MK4

  • Prusa MK4/MK4S

Tested on Prusa MK3S+ with fast retractions.


This remix adds a functional PTFE tube holder to the original design while keeping installation simple and tool-free.
It is meant to be a small, practical improvement that solves a real-world issue without adding complexity.

Tagi