PTFE Holder with Passive Tube Lock (Prusa MK3S+)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
PTFE tube holder with passive anti-pullback function preventing backward movement during retractions when not horizontal
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 14
- Makes
- 0
- Views
- 155
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v2.0
Description
This part is a PTFE tube holder designed for Prusa MK3 / MK3S / MK3S+ printers.
Its primary function is to hold and guide the PTFE tube, but it also provides a passive anti-pullback effect during retractions.
Unlike active clamps or rollers, this design works purely through geometry and controlled friction.
How it works
As long as the PTFE tube is not perfectly horizontal, the holder uses:
the tube angle
and controlled surface friction
to reduce backward movement of the PTFE tube during retractions.
Instead of being pulled back (for example into a filament dryer), the tube tends to move upward and flex naturally together with the toolhead.
The PTFE tube is not rigidly clamped.
It can still:
flex freely
follow X and Z axis motion
return to its neutral position automatically
This prevents excessive stress on the extruder or hotend while still limiting backward tube movement.
When this part is useful
This holder is especially helpful if:
you are using fast or frequent retractions
you are running Klipper
your filament comes from a dryer or external holder
you have experienced PTFE tube pullback during retractions
Important note
This design relies on tube angle to work correctly.
If the PTFE tube is installed perfectly horizontal, the passive anti-pullback effect will be reduced.
This is intentional and part of the design concept.
Files included
Left version
Right version
Combined file (left + right)
Print only the version you need.
Printing recommendations
Material: PLA or PETG (PETG recommended for durability)
No supports required
Print orientation: as provided in the STL
Standard 0.4 mm nozzle works well
Compatibility
Prusa MK3/S/+
Prusa MK3.5/MK4
Prusa MK4/MK4S
Tested on Prusa MK3S+ with fast retractions.
This remix adds a functional PTFE tube holder to the original design while keeping installation simple and tool-free.
It is meant to be a small, practical improvement that solves a real-world issue without adding complexity.
