1 / 4
Cerbo GX and Tank 140 Housing, Optional Touch 50 Cover — zdjęcie 1
1 / 4

Cerbo GX and Tank 140 Housing, Optional Touch 50 Cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a housing to mimic the look of the Victron equipment to house the Cerbo GX and Tank 140 with the Touch 50

Ocena
0 / 5
Polubienia
12
Pobrania
130
Wydruki
0
Wyświetlenia
980
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial

Printed this on a Creality K2 Pro with Creality Hyper PLA in Black, Blue and Orange.

I used the default settings for the filament and print settings, just removing the brim option.

The model is designed to take a Cerbo GX and a GX Tank-140 on the inside and a GX Touch 50 mounted on the front.  I will also make a version for the Touch 70 or no touch if requested.

Extra components:

  • 4x M3 3x4.2 nut inserts on the top to attach the Touch 50 and its mounting plates.

  • 6x M4 4x5 nut inserts on the base plate posts to attach the cover.  

  • 2x M4 4x5 nut inserts in the bottom cover to attach through the base plate.

  • Super glue to attach the orange strip to the top cover.

Other instructions:

  • The Corners are purely intended to match the look of the other Victron kit in my setup, and I just used the soldering iron to melt them to the covers.

Feel free to sponsor me some filament or buy me a coffee :)  paypal.me/dkpeall

Tagi