Bed Frame Connector – Practical Bracket for Joining Two Wooden Slats
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
just simple as that but messaure the holes etc to fit it perfectly
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 76
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Fix your bed in minutes and sleep without worries!
Is your bed frame falling apart? Are the slats sliding around or making annoying noises every time you move? This heavy-duty connector is designed to lock two boards (slats) together, reinforcing your bed’s structure and preventing that dreaded "middle-of-the-night collapse."
Why this is a must-print:
Rock Solid Support: Engineered to handle weight and lateral pressure.
Silence the Squeaks: Stops boards from rubbing against each other or the frame.
Universal Fit: Designed for standard bed slats (Works best with 15-20mm thick boards - uprav podle tvého modelu).
Easy DIY Fix: No need to buy a new bed or use messy glues. Just slide it on or screw it in.
Technical Specs & Print Settings:
⚠ Safety Note: Since this is a structural part, please use high-strength settings.
Material: PETG, ASA, or Nylon are highly recommended (PLA might be too brittle for long-term weight).
Wall Loops: 5-6 (This is where the strength comes from!).
Infill: 40% or higher (Honeycomb or Gyroid for maximum compression strength).
Layer Height: 0.2mm or 0.28mm for better bonding.