Raspberry Pi 5 - 52PI NVDIGI HAT - Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for Pi 5 with 52Pi NVDigi (EP-0220)
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 162
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
The TOP case is developed in 2 parts due to RCA output.
First install both TOP parts with Pi5.
Close assembly with BOTTOM part.
I printed in PLA at 0.1mm height and 0.4 nozzle.
I think best practice to add some spacers at the bottom, for better airflow.
To lift the whole case you can use some small self-adhesive protection pads.
**UPDATE**
I did some extra tweaks after printing and testing the first remixed case.
I added the printable feet (I did not need glue) and optimized the click system for better overall bottom-top connection. Also changed some details to make the bottom part less fragile. I do not have a fiber optic audio cable at hand right now so i could not test.