1 / 7
God of War Blades of Chaos — zdjęcie 1
1 / 7

God of War Blades of Chaos

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Kratos' Blades of Chaos from God of War

Ocena
5 / 5
Polubienia
74
Pobrania
438
Wydruki
1
Wyświetlenia
1492
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

The model is slightly longer than the real Blades of Chaos, with the model coming in at ~28 in

Just like my previous Draupnir Spear, this model is also fully 3D printed and involves threads in the handle, and the blade is glued with the same PVA glue I used for the spear. 

All of the parts need support, and I'd recommend a brim as well, just to be safe.

The big gold piece in the middle (idk what its called) has 2 square pegs to hold the blade, but those are just to guide the blade piece, not to hold it. It still needs glue to secure it properly

DISCLAIMER: When I ended up printing mine, one of the blade pieces ended up warping while printing.
I edited the files and it still warped a bit when I finished. I was able to fix this with some woodfiller, but if anyone has any ideas on how to fix this, please let me know.

When printing, each piece is labeled with a number. Follow the image guide above for how to assemble it same as the spear.

Infill: 15%
Material: PLA
Supports: Handle parts need support, but the blade parts don't
Brim: All parts are required

Tagi