God of War Blades of Chaos
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Kratos' Blades of Chaos from God of War
- Rating
- 5 / 5
- Likes
- 74
- Downloads
- 438
- Makes
- 1
- Views
- 1,492
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Cosplay & Costumes in general
- License
- Creative Commons — Attribution — Share Alike
The model is slightly longer than the real Blades of Chaos, with the model coming in at ~28 in
Just like my previous Draupnir Spear, this model is also fully 3D printed and involves threads in the handle, and the blade is glued with the same PVA glue I used for the spear.
All of the parts need support, and I'd recommend a brim as well, just to be safe.
The big gold piece in the middle (idk what its called) has 2 square pegs to hold the blade, but those are just to guide the blade piece, not to hold it. It still needs glue to secure it properly
DISCLAIMER: When I ended up printing mine, one of the blade pieces ended up warping while printing.
I edited the files and it still warped a bit when I finished. I was able to fix this with some woodfiller, but if anyone has any ideas on how to fix this, please let me know.
When printing, each piece is labeled with a number. Follow the image guide above for how to assemble it same as the spear.
Infill: 15%
Material: PLA
Supports: Handle parts need support, but the blade parts don't
Brim: All parts are required