Watering Can Head (28mm diameter)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print in place watering can replacement head for 28mm diameter plastic watering can spout.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 135
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Open Community License v1
***UPDATED***
The G.CODE file that I originally updated I noticed had a weakness in the neck. The added STL file has some reinforcement in an attempt to make it more solid.
******************
I made this design to fit my watering can, which has a 28mm diameter spout...If you live in Australia, it's for a Bunnings Nylex 9l watering can.
Whilst there were other models already available, none of them fitted snuggly on the watering can...So I made my own from scratch.
What's shown in the pics is the original prototype, which was PLA+. I hadn't completely trimmed the excess filament of the model, but in reality, it doesn't need the base support. I then printed in PETG so that contact with water was less of a problem.