Watering Can Head (28mm diameter)
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.67 – €2.05 net (excluding VAT)
For file: EN4_Watering can - Final Model.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.86 excluding VAT (range midpoint).
- Weight reported by the author
- 33 g
- Print time reported by the author
- 1.5 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Print in place watering can replacement head for 28mm diameter plastic watering can spout.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 37
- Makes
- 0
- Views
- 135
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Open Community License v1
***UPDATED***
The G.CODE file that I originally updated I noticed had a weakness in the neck. The added STL file has some reinforcement in an attempt to make it more solid.
******************
I made this design to fit my watering can, which has a 28mm diameter spout...If you live in Australia, it's for a Bunnings Nylex 9l watering can.
Whilst there were other models already available, none of them fitted snuggly on the watering can...So I made my own from scratch.
What's shown in the pics is the original prototype, which was PLA+. I hadn't completely trimmed the excess filament of the model, but in reality, it doesn't need the base support. I then printed in PETG so that contact with water was less of a problem.