862D+ Soldering Station Nozzle and Tip Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fits 12 soldering tips (up to 6.8mm outer diameter) and four nozzles (up to 23.6mm diameter), with extra room to store…
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 109
- Wydruki
- 0
- Wyświetlenia
- 1022
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Fits 12 soldering tips (up to 6.8mm outer diameter) and four nozzles (up to 23.6mm diameter), with extra room to store some solder.
This holder has about the same extent as the heat gun holder and can be mounted to the case below the heat gun with the station's two bottom screws.
The 862D+ stations are sold under different brand names like Zeny, WEP and Yihua (mine is unbranded). While the housings have the same dimensions, the provided nozzles differ slightly with some types having fasteners attached. Hence, the nozzle slots have a 20mm cutout for the fastener. The mounting holes are 76mm apart.
Print instructions
Prints without supports. 0.2 layer height. I used PETG but PLA should do fine.