Hueforge Red: The Great Wave off Kanagawa
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A series of hueforges, inspired by the great ukiyo-e artist Katsushika Hokusai.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 99
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
Hello everyone,
this is a hueforge, inspired by the classic art of Hokusai. I made several colour variation, and each of it looks quite good, so feel free to experiment with different colours, it will turn out nice.
Printing:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 150x105.82mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
#000000 PLA Alzament Black Transmission Distance: 0.2
#aa0000 PLA Alzament Red Transmission Distance: 2
#de4343 PLA BambuLab Matte Scarlet Red Transmission Distance: 2
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Red
At layer #11 (0.96mm) swap to Scarlet Red
At layer #18 (1.52mm) swap to Jade White for the rest.
Happy printing!