Hueforge Sepia: The Great Wave off Kanagawa
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A series of hueforges, inspired by the great ukiyo-e artist Katsushika Hokusai.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 112
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
Hello everyone,
this is a hueforge, inspired by the classic art of Hokusai. I made several colour variation, and each of it looks quite good, so feel free to experiment with different colours, it will turn out nice.
Printing:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 149.99x105.79mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
#080a0d PLA PolyLite Black Transmission Distance: 0.3
#6f5034 PLA BambuLab Basic Cocoa Brown Transmission Distance: 0.4
#ff9016 PLA BambuLab Basic Pumpkin Orange Transmission Distance: 5.5
#e7ceb5 PLA BambuLab Basic Beige Transmission Distance: 8
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Cocoa Brown
At layer #13 (1.12mm) swap to Pumpkin Orange
At layer #19 (1.6mm) swap to Beige for the rest.
Happy printing!
