8-INCH FLOWER POT RISER
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a riser for an 8-inch flower pot, grow bag, or anything 8-inches in diameter to be raised off the floor.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 130
- Wydruki
- 1
- Wyświetlenia
- 515
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a riser for an 8-inch flower pot, grow bag, or anything 8-inches in diameter that needs to be raised off the floor. It features drainage holes on the bottom.
- Fits this type of flower pot: 2 Gallon Plastic Garden Flower Pots with Drainage - https://amzn.to/2Yqgne0
- Fits this type of grow bag: 2 Gallon Grow Bags - https://amzn.to/3iWqfFz
*Note: This post contains Amazon Affiliate links that support The Makers Workbench via a small commission from any sales they help generate.
Design File Included: .stl .f3d, step, .skp and obj files.
Follow The Makers Workbench on:
I have only tested this model using the default .35mm Linear Advance preset in Prusa Slic3r 2.2.0 with the following amendments made.
- 7-perimeters
- 4-top layers
- 4-bottom layers
- 100% infill
- Concentric Infill
- Concentric Top and Bottom Pattern
Print time on a stock Prusa i3 MK2s is about 2-hours 30-minutes and uses an estimated 56-grams of PLA filament.
PLA Used: Polymaker Polylite PLA - https://amzn.to/3mTrbuU