1 / 3
AirAssist Nozzle for Ortur Lasermaster 2 Pro S2 SF
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For Lasermodule LU2-4-SF and a M6 Bowden Coupler
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 79
- Wydruki
- 1
- Wyświetlenia
- 346
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (17)Powiązane
Is attached to the rear of the laser module at the original existing holes. The magnetic protective cover is simply rotated 90 degrees.
Nozzle opening is 0.8mm, so I printed it on a SLA printer. You lose 10mm on the Y-axis, so best to reduce the print area accordingly in the software.
Additional material:
2x M3x6mm countersunk screws
1x M6 Bowdencoupler
Tube 4mm ID / 6mm OD