1 / 3
AirAssist Nozzle for Ortur Lasermaster 2 Pro S2 SF
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For Lasermodule LU2-4-SF and a M6 Bowden Coupler
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 79
- Makes
- 1
- Views
- 346
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Is attached to the rear of the laser module at the original existing holes. The magnetic protective cover is simply rotated 90 degrees.
Nozzle opening is 0.8mm, so I printed it on a SLA printer. You lose 10mm on the Y-axis, so best to reduce the print area accordingly in the software.
Additional material:
2x M3x6mm countersunk screws
1x M6 Bowdencoupler
Tube 4mm ID / 6mm OD