Compact 90° Right-Angle Bit Holder – Ultra-small for tight spaces
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
0,53 € – 0,65 € netto (bez VAT)
Dla pliku: compact-angle-bit-tool-by-prntmkr.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,59 € netto (środek widełek).
- Masa podana przez autora
- 9 g
- Czas druku podany przez autora
- 30,6 min
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Compact 90° Right-Angle Bit Holder – Ultra-small for tight spaces
- Ocena
- 5 / 5
- Polubienia
- 859
- Pobrania
- 2891
- Wydruki
- 34
- Wyświetlenia
- 9380
- Oceny
- 34
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Intro
This is a very compact, low-profile 90 degrees right-angle bit holder for standard hex bits. It is designed to reach screws where a normal screwdriver or bit holder simply does not fit.
The special designed variable bit fitting will make sure every bit will fit.
Important (so there are no false expectations): This tool has no gearbox and no ratchet inside. It is a pure 90° redirection of the drive. That keeps the tool:
extremely small
lightweight
mechanically simple
and ideal for quick, light-duty work in tight spots
Typical use cases
screws behind panels
narrow gaps in cabinets or shelves
places where a normal bit holder or small screwdriver is already too long
PS: Want more of this? Be my follower! ❤
Why you'll love it?
Ultra-compact design – fits into spaces where even small right-angle adapters are too bulky
No gearbox, no ratchet – no nonsense – simple 90° drive means fewer parts, less friction and a slimmer tool
Lightweight and pocket-friendly – perfect to keep on your desk or in your small tool kit
Fast access for quick fixes – ideal for furniture, small repairs and electronics work
Designed for makers – easy to print, easy to use, takes just a few minutes
Recommended print settings
Nozzle: 0.4
Layers: 0.2
Infill: 100%
Perimeters: 3
Material: I recommend to use PLA (see below)
Filament recommendation
I printed this model using Prusa Prusament and got great results. See below for my recommendations.
Prusament PLA Prusa Orange
Copyright
You are welcome to print this model for personal use. Please respect the copyright. Unauthorized reuploads are monitored and reported.
Feedback & Support
If you enjoy this model, please consider hitting the LIKE button – it truly supports my work.
Have ideas, FEEDBACK or suggestions for improvements? I’d love to hear them – feel free to leave a comment.
Printed it already? That’s the best compliment! Please share a photo in the MAKES section – seeing your prints is incredibly motivating and helps others get inspired too.
Thank you for supporting independent designers and makers. ❤
Follow me for more like this...
FOLLOW ME for more practical prints, upgrades, and tools – new models coming soon.
Check out my profile for all uploads.
You may also like these models
This model is part of my huge collecion. Do not miss to check out what else could be useful to you.
